LaSquare Combination Square - Wide Faced

Great piece of kit just what we needed for our busy workshop

Amazing square. Must have for any decent fabricator. Makes working on heavy box sections so easy. And anything with a large radius edge. Worth every penny

Very smooth transaction. Great communication and fast delivery. Would use again.

Excelent for large box section steel

I have used the LaSquare for a few years on large beams and large radius box (and of course tube) and it has been invaluable (only replaced as the old one got 'borrowed')- I now work primarily with brake presses and the square is perfect for ensuring the small job's are square to the tooling every time. Perfect for all fabricators and a must for sheet metal / brake press operators. As for the quality - can't fault it, I do prefer the original rule over the newer 'shinier' one but it still does the job flawlessly.

Heavy box section with large radius corners. This square is a game changer, just need to bring out wide faced protractor and *** edge.

Excellent bit of kit

Perfect measuring tool for welders and engineers.

Super useful, well made and very accurate. Compared this to an inspection grade square and it is flawless. Very happy with the product.

Get what you pay for it?s top quality I use every day

Brilliant for box section and wide radius

Great service

For work, would reccommend to co workers top quality product

Bought for one of the operatives at the company I work for, so unfortunately unable to offer feedback for the use of this item.

very useful for large box section steel and small to medium steel pipe due to the wide base which works much better than conventional combination squares on rounded edges.

Same again the square is a lot of money but won?t last in my particular job such as the old cast steel type

This is great for fabricators using large box sections with a big radius best square I have

lasquare is a must have for professional fabricators very accurate build quality is as good as my very expensive *** and *** set. I find lasquare very useful in several different applications I work with lots of large box section and the radios on the 6mm and up is quite large and my smaller square tends to slip off when trying to chalk a line 25mm back from the edge of the box section andvalong a 15meter length it can get a little tedious when you keep sliding off the edge the lasquare has made this much easier also a lot faster it stands up much better when squaring up on post's ,legs or any uprights.and corners I don't often uses these and I don't know many people that do but being made from aluminium it doesn't stick to a welding magnet which is good if you want to use them to hold something in place and your trying to square it I also find it possible to mark up larger tube and ** pipe pieces I first though that there would be several applications that the larger body would get in the way but so far for me it's been fine the only thing I would have liked was a better box for it like a plastic one with the soft foam tray inside I like to correctly use and store my *** expensive precision tools and I would guess that outher fabricators do aswell but no matter how much I try to keep the carbord box in good shape it won't last long in a engineering and fabrication environment I understand about cost and its a very well priced product for the quality and to save putting the price up then maybe have a optional protective case at purchase I would think that over 60% of customer's would go for it expesaly being a product that most people will buy as a secondary tool for surtan applications like I did only to be pleasantly surprised to find its actually very possible to use as your every day square but it would be better to be able to store it as safe as possible when it's not being used my square is one of my most important most used also one of the more expensive tools in my box plus every one thinks that a square is cheap rubbish unless it's comes in a decent storage box the first thing my boss said when he see the box it came was what's that cheap rubbish you've brought until he had a good look at it

Excellent product, especially useful for it to have the longer rule as well

Used for general fab work on a daily basis, would recommend highly for fabricators. The extra width gives good stability when stood up on the table. Accuracy is very good as is build quality, slightly on the pricey side however it is a very good addition to the workshop and I wouldn't be without it now.

Fabrication I use it for market material daily Every fabricator should have one High qaulity from product to packaging

*****

***

Excellent does as it says

Bought because I have used a buddies Lasquare before. It is a wicked bit of kit. Great for marking box section with a large radius.

1st class quality and multi purpose use

Good qualify, useful will be getting another one.

A great product that really is useful.glad I purchased one.

Good quality product

Purchased for work in a fab/welding shop...earning it's keep from day one. Well made and a must for the general metal fabricator

Very well made & square

Quality square not as heavy as it looks. Wish I'd got one years ago.

Great for SHS with large radius corners and RHS.

Good product would be better if the rule could be purchased in imperial as well.

Excellent

Very handy piece of kit.

Well made. Wish there was ft/in on one side as well as cm/mm on the other. Otherwise a quality item.

Good product seen on you tube, Welding tips and tricks.com

Nice and light weight.

Recently received La Square combination square, very pleased with the design & quality.Usefull for both metal & woodworkers

Very good quality, nice and sturdy

Very nice product as described.***

Ace bit of kit, useful for anyone wanting to scribe lines on anything in the workshop or out on site.

Has been out of stock for a whole

good item glad I found it

Use it for laying out at work on larg box sections it is so much easier than fighting with a normal squaire.Would recomend it to anyone doing the same.