GrabPak - 600 S|ELHARD Electrode (4.0mm) 0.5kg
-
Applicable in final layer hardfacing of parts of earth and mineral mining machines, impact drilling and crushing devices, guide springs, edges of cutting tools, hard manganese steels, bucket edges and teeth, all of which are made of alloyed or unalloyed steels, as well as in other materials required to have high resistance to wear
-
Electrode of basic type with thick coating
-
lnclusion of chromium-silicon alloy, very hard electrode
-
Weld metal with ductile and cracking resistant behaviours: Crack resistance to impact force due to its high ductility: Machinability of weld metal through grinding only
-
It is recommended to pre-heat at 200-300°C for welding thick work pieces and materials tending to get hardened: Requirement of 2-3 layers hardfacing to obtain the highest resistance to wear
-
Suitable for harder and/or higher quality steels to buffer layering with the GeKa electrodes LASER B 50, TEMPO B 63, or, in some cases, with the GeKa electrodes such as ELOX B307, ELOX R 312
-
Requirement of re-drying for min. 2 hours at temperatures of 300°C
Approx pack quanitity - 8 rods
